CELLTRON™ Advantage Digital
Liên hệ
The CELLTRON™ Advantage Digital is a fast, user-friendly, premium handheld tester for measuring battery conductance, voltage, temperature and strap resistance in high-noise environments for a complete battery state-of-health analysis.
- Mô tả
Mô tả
Components & Dimensions
1. LCD display
2. Tester body
3. Glove-compatible key pad
4. Port access door
5. USB A port (data storage/transfer)
6. USB B port (PC connection)
7. On-board re-charging port
8. Probe/clamp cable port
9. Temperature sensor
10. Infrared printer LED
11. Rechargeable battery pack
12. Side vent
13. Rear vent
14. Rubber handle grip
15. Probe testing interface
16. Clamp testing interface
17. Integrated light
18. Interchangeable cable port
Specifications
Voltage Range
-
0.8 – 23.5 Volts DC
Conductance Range
-
100 – 19,990 Siemens
(Conductance testing voltage range 2.1V to 23.3V. Battery should be fully charged for best results.)
Test Data Storage
- 50 string locations of 240 test results
- Stored internally
- Unlimited transfer to USB drive
Accuracy
-
+/-2% across test range, voltage & conductance
Voltmeter Resolution
-
5mV
User Programmable Functions
- Preset values for over 250 battery types
- Low voltage alarm setting
- Low conductance warning
- Low conductance failure
- Test mode (pushbutton/auto start)
Cable Options
- Dual contact clamps
- Dual contact probes
- Custom cables by quotation
Power Requirements
- 7.2V, 2300mAh, NiMH
- Internal swappable battery & charger
LCD Display
- 2.97 in x 2.81 in (75.4 mm x 71.3mm)
- 128 x 128 pixels
- 40 degree viewing angle
- LED backlight
Keypad
- Alpha-numeric
- Stainless-steel dome
- Polycarbonate overlay
- 1,000,000 actuations
Data Transfer
- Wifi
- USB 2.0 Flash Drive (Type A)
- USB 2.0 PC Interface (Type B)
- Half-duplex IrDA protocol for optional printer
Environmental Operating Range
- 0 to +104°F (0 to +40°C)
- 95% relative humidity
- Non-condensing
Storage Temperature
-
-4 to 180°F (-20 to 82°C)
Over Voltage Protection
- Auto-reset disconnect
- Reverse polarity protected
Housing Material
- Acid-resistant ABS plastic
- Santoprene™ overmold
Housing Material
-
11in x 4in x 3in (279mm x 105mm x 80mm)
Tester Weight
-
2.6 lb (1 Kg)
Languages
- English
- Spanish
- German
- Polish
- Portuguese
- Dutch
- Russian
- French